Wholesale ChopAid Antibacterial best plastic cutting board | 10" X 15" with Non-Slip Feet and Juice Collector.
- Model
- 6645
Item specifics
- Material
- TPE and polypropylene
- Size
- 37 × 25 × 1 cm
- Thickness
- 10 mm
- Antibacterial additive
- Arkshell, compounded into the polymer
- Colour
- Orange, green
- Faces
- One ribbed face, one flat matte face
- Measuring scale
- Moulded along the top edge
- Grinding area
- Recessed dotted panel, one end
- Underside
- Embossed non-slip pattern
- Dishwasher
- Yes
- Certification
- FDA, LFGB
- Port
- Shanghai or Ningbo
Review
Description
37 × 25 × 1 cm · model 6645 · orange and green At 25 cm wide this is the narrowest board in the family, and that is the whole point of it. Most worktops are quoted at 60 cm deep; almost none of them offer 60 cm of clear surface once a hob, a sink and a coffee machine have taken their share. This board is sized for what is actually left. It also carries two details the other models do not: a measuring scale moulded along the top edge, and a fine ribbed finish on one face. Both are small things that change how the board gets used, and neither appears in most listings. The difference between this board and the 40 × 30 model is not proportional, it is categorical. A 40 cm board needs a worktop with room to spare. A 37 × 25 board fits on the strip of counter left between the sink and the hob in a small flat, which is where most prep actually happens. Where it stops is whole ingredients. A whole chicken will overhang this board, and half a watermelon will not sit on it at all. Buyers should treat this as the everyday board in a small kitchen, not as the board for breaking down a carcass. Moulded into the top edge of this model there is a short measuring scale, a row of graduated marks for sizing a cut rather than just making one. It is the least advertised feature on the board and the one that gets used without thinking once it is there. It is a guide, not a precision instrument. Moulded marks carry normal tooling tolerance and the scale is short, so it is for consistency rather than measurement. Presenting it as a ruler would oversell it; presenting it as a guide is accurate and still useful. The scale and the grinding area sit at opposite ends of the board. That placement is deliberate: it keeps the measured edge clear of the wet work. One face is finished with fine parallel ribs; the other is a flat matte surface. The ribs are not decorative. They break the contact patch between a wet ingredient and the board, so a tomato or a piece of fish is less likely to skate while it is being sliced, and liquid drains away from the cut instead of pooling under it. The flat face is the opposite tool. It is the one to use when the food has to leave the board in one movement — scraping diced onion into a pan, or sliding a fillet into a tray. Ribs interfere with a sliding action; a flat face does not. At one end of the board there is a small recessed area with a dotted texture — the grinding area, for garlic and ginger. It works the same way as the panel on the larger models: crush first, then work the piece across the dots to break down the fibres. The juice collector is the channel formed between the working surface and the rim. On a board this narrow the channel is shorter than on a 40 cm model, so it holds less — enough for a tomato or a resting steak, not for a melon. It is worth being precise about that in a listing, because a buyer who expects a reservoir will complain and a buyer who expects a channel will not. This is the only board in the family whose specification names its antibacterial additive: Arkshell, compounded into the polymer before moulding. Because the additive is in the material rather than on it, dishwashing does not strip it and knife marks do not expose untreated plastic underneath. The performance figure quoted for it is 99.9 percent. That number only means something when it is tied to a test method — ISO 22196 or JIS Z 2801 are the usual ones — and to a specific material batch. Ask for the report rather than accepting the percentage on its own, and do not repeat the figure in a listing without it. An antibacterial additive reduces bacterial growth on the surface. It does not sterilise food, it does not clean the board, and it does not replace washing after raw meat. Orange and green are stock colours. A custom shade has to be agreed as a compounded colour because the material is coloured throughout, and that carries a higher minimum than either stock option. Logo placement works best on the flat face, away from the scale and the grinding area. Printing over either interferes with a moulded feature that the customer is paying for. Price is quoted against the specification rather than listed, because colour, packaging and quantity all move it. Send the configuration and a written quotation follows. They are a measuring scale for sizing cuts — even dice, consistent bread slices, portioning by eye. They are moulded marks with normal tooling tolerance, so they are a guide for consistency rather than a precision ruler. No. On a 25 cm wide board the channel holds enough for a tomato, a few fillets or a resting steak. It interrupts liquid on its way off the board rather than storing it. It needs a rinse before dishwashing, particularly after mincing, because fine particles sit in the ribs. The board is dishwasher safe and the ribs do not trap anything that a normal cycle will not clear. Arkshell is the antibacterial additive compounded into this board's polymer. The 99.9 percent figure is only meaningful against a named test method and a specific material batch, so ask for the test report rather than quoting the number alone. Yes, and the two faces do different jobs — ribbed for wet or slippery ingredients, flat for sliding food off the board in one movement. Stock orange and green carry one minimum; a custom compounded colour carries a higher one. Packaging format affects it as well. Send the configuration for a specific figure. Send the clear counter dimensions and the colour mix you need. A quotation with sample timing comes back the same way. OEM and ODM welcome · FOB Shanghai or Ningbo · T/T
37 × 25 cm Is the Narrow Board
The Scale Along the Top Edge
Two Finishes on Two Faces

Grinding Area and Juice Collector

Arkshell: the One Model With a Named Additive
Specifications
Model 6645 Size 37 × 25 × 1 cm (approx. 14.6 × 9.8 in) Thickness 10 mm Material TPE and polypropylene Antibacterial additive Arkshell, compounded into the polymer Colour Orange, green Faces One ribbed face, one flat matte face Measuring scale Moulded along the top edge Grinding area Recessed dotted panel, one end Juice collector Channel between working surface and rim Underside grip Embossed non-slip pattern Dishwasher Yes Certification FDA, LFGB Price Quoted against specification, quantity and packaging Port Shanghai or Ningbo Payment T/T Who This Board Suits
Right for
Wrong for
Ordering and Customisation
Frequently Asked Questions
What are the marks along the top edge for?
Is the juicing channel deep enough for a watermelon?
Does the ribbed face make the board harder to clean?
What is Arkshell and is the 99.9 percent figure reliable?
Can the board be used on both sides?
What is the minimum order quantity?
Sizing a board for a small worktop?






