Customized Colorful Flash Dot Faux Marble Non-Slip Chopping Board Large, Medium and Small Combo Set
Customized Colorful Flash Dot Faux Marble Non-Slip Chopping Board Large, Medium and Small Combo Set
Customized Colorful Flash Dot Faux Marble Non-Slip Chopping Board Large, Medium and Small Combo Set
Customized Colorful Flash Dot Faux Marble Non-Slip Chopping Board Large, Medium and Small Combo Set
Customized Colorful Flash Dot Faux Marble Non-Slip Chopping Board Large, Medium and Small Combo Set
Customized Colorful Flash Dot Faux Marble Non-Slip Chopping Board Large, Medium and Small Combo Set
Price
US $3
Model
6605 set
MOQ
1 piece

Item specifics

Material
Polypropylene face with moulded TPE end bands
Sizes
26.5 × 16.5 × 0.8 cm / 31.5 × 20.5 × 0.8 cm / 36 × 24.5 × 0.8 cm
Section
8 mm on all three
Colours in set
Blue, red, green
Face
Solid colour with a fine metallic speckle
Handle
Slot in the top edge
Set
Three boards, nestable
Dishwasher
Yes
Certification
FDA, LFGB
Port
Shanghai or Ningbo

Review

Description

26.5 / 31.5 / 36 cm · model 6605 set · blue, red and green

Three boards arrive together in this set: a blue one, a red one and a green one, stepping up in size so they nest inside each other in a drawer or stand together on a counter. The colour is doing the work here. Blue for fish, red for raw meat, green for vegetables is the convention most buyers already run, and a set that arrives in those three colours needs no instructions.

What the photographs on this page are meant to make clear is what the surface actually is: a solid colour with a fine glitter speckle suspended in it, not a marble print. Listing copy elsewhere has called it faux marble. It is not, and a buyer who orders on that word will open the carton and find something different.

  • Set of three
  • Blue, red, green
  • Glitter speckle face
  • 8 mm section
  • Hanging slot
  • Dishwasher safe
36 × 24.5 cmLargest board
8 mmSection
3Boards in the set
Set of three plastic cutting boards in blue, red and green nested together
The three boards share one outline at 26.5, 31.5 and 36 cm, so they nest. Each board has a slot cut into the top edge and a darker band moulded across the top and bottom ends.

Three Colours Solve a Problem Fourteen Boards Cannot

The common way to sell separation of raw and ready-to-eat food is to offer a board in five or six colours and let the customer buy them one at a time. Most households buy one. A set of three in the three colours that matter most — raw meat, fish, vegetables — gets the customer to the right behaviour in a single purchase.

For a distributor, the set is also a simpler line item. One SKU, one carton, one price, instead of three SKUs that each need their own shelf space and their own stock cover.

What the colours are for, and what they are not

The colours are a memory aid, not a certification. Nothing about a red board makes it safer for raw meat; what makes it safer is that the red board is the only one that touches raw meat. A kitchen that washes all three in the same sink at the end of the night still needs to wash them properly.

Blue, red and green is the most widely recognised three-colour scheme, but it is not universal. Some markets code poultry as yellow and cooked food as white. If the set is going into a foodservice catalogue, confirm the local convention before the colours are fixed.

Single green cutting board from the set photographed flat on a white background
One board out of the set, photographed flat. The speckle is a fine metallic flake in the polymer, clear at close range and almost invisible from a metre away.

The Surface Is a Speckle, Not a Marble Print

A marble print is a film or a transfer sitting on top of the plastic. A speckle is colour and metallic flake compounded into the polymer itself before the board is moulded. The difference matters over time: a print can lift at the edges or wear through where the knife works, while a compounded speckle goes all the way through the section and cannot come off.

The flake is fine. At arm’s length the boards read as solid blue, red and green, and the sparkle only shows when the light catches the surface at an angle. That is usually the right balance for a kitchen tool, because a coarse glitter would look like a craft product.

Why each board has a darker band at the ends

Each board in the set carries a band moulded in a darker shade of its own colour, running across the two short ends and finishing flush with the long sides. The band sits slightly proud of the face, which gives the hand a defined edge to catch when lifting a wet board. It is not a juice groove — there is no channel cut for liquid — but it does slow the run-off at the ends.

What 8 mm Gets You

At 8 mm these boards are stiff enough to be carried with food on them and thin enough to store in a narrow slot. That is the middle of the market: thicker than the 5 mm prep boards that flex, thinner than the 10 to 12 mm boards that are meant to be the only board in the kitchen.

For light cleaver work and normal knife prep, 8 mm is enough. For chopping through joints or repeated heavy impacts, it is not, and the copy on a wholesale listing should say so rather than implying that any plastic board takes any knife.

Person holding the largest board from the set upright by its hanging slot
The slot at the top edge is wide enough for two fingers and is the only feature on the face. It lets the board hang on a hook, which is how most catering kitchens store a three-board set.

Specifications

Model6605 set
Sizes26.5 × 16.5 × 0.8 cm · 31.5 × 20.5 × 0.8 cm · 36 × 24.5 × 0.8 cm
Section8 mm on all three
MaterialPolypropylene face with moulded TPE end bands
FaceSolid colour with a fine metallic speckle
Colours in setBlue, red, green
HandleSlot cut into the top edge
StorageBoards nest inside one another
DishwasherYes
CertificationFDA, LFGB
PortShanghai or Ningbo
PaymentT/T

Who This Set Suits

Right for

  • Households buying separation of raw meat, fish and vegetables in one purchase
  • Distributors who would rather carry one SKU than three
  • Gift and housewarming packs, because three nested boards present well
  • Small kitchens where a nested set stores in one slot

Wrong for

  • Kitchens that already run a full colour-coded system
  • Buyers who need a marble print — this is a speckle
  • Heavy cleaver or bone work
  • Anyone who needs the boards to be identical in size

Ordering and Customisation

The three colours in the set can be changed, and partial changes are possible: a set of blue, yellow and green, for instance, if the market codes poultry in yellow. Because the colours come from masterbatch rather than print, a custom combination needs a minimum run per colour, and that is the number to ask about first.

Packaging is where most of the cost variation sits in a three-piece set. A shrink-wrapped bundle, a printed sleeve and a colour box are three different price points for the same three boards, and the choice is usually made on how the set is expected to be displayed rather than on cost alone.

Prices are FOB and exclude packaging, printing and freight. A three-piece set is quoted on the colour combination and the packing format, so send both with the enquiry.

Frequently Asked Questions

Is this a faux marble board?

No. The face is a solid colour with a fine metallic speckle compounded into the plastic. Some listings call it faux marble; the photographs on this page show what it actually looks like.

Are the three boards the same thickness?

Yes, all three are 8 mm. Only the length and width change across the set.

Do the boards nest?

Yes. The outlines step up by roughly 5 cm and 4.5 cm, so the smaller two sit inside the largest. That is also how the set is packed.

Can the set be ordered with different colours?

Yes. The colour comes from masterbatch rather than print, so any combination is possible. A custom combination carries a minimum run per colour, which is quoted on request.

Can one board be replaced on its own?

The boards are sold as a set for wholesale, but single colours can be supplied as a separate line if the volume justifies it. Mention it when enquiring.

Is the metallic speckle safe in contact with food?

The flake is encapsulated in the polymer, not loose on the surface. The finished board is tested to FDA and LFGB food-contact requirements, and the test reports are available on request.

Building a colour-coded programme?

Send the colour combination, the sizes and the packing format. A set quotation and a sample schedule follow.

Request a quote and sample

OEM and ODM welcome · FOB Shanghai or Ningbo · T/T